Menu
Your Cart

RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MC

 RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control.  VGLCDPNRRKIT-TNC/0/MC
Out of Stock - On Backorder
RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MC
RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MC
Variable gain portable networked re-radiating kit with LCD | TNC Connectors, 9VDC—32VDC Ouput Voltage

This variable gain portable networked re-radiating kit is designed to re-distribute GPS signals where an L1 antenna is already in use. Portable re-radiating kits consists of a re-radiating antenna, an amplifier with external power supply for powering the entire system. In the standard networked configuration, the re-radiating amplififer output J1 is DC blocked while the antenna port receives RF signal and passes DC voltage back to power an active antenna.  Custom gain, DC power, and connector configurations are available.
 

This portable GPS re-radiating kit (Alternate Part# VGLCDPNRRK) features variable gain with LCD display, TNC connectors,  and 9 VDC — 32 VDC MIL-DTL-5015 10SL source power. 


  • Re-radiating amplifier with external power supply: 30 dB typical gain
  • Option mounting kit hardware
  • Optional variable gain amplifier: adjustable from 1 dB — 25 dB
  • Optional variable gain amplifier with LCD: adjustable from 1 dB — 30 dB

Product Codes

Mfr Part No:VGLCDPNRRKIT-TNC/0/MC


Re-Radiating Antenna:Weight: 1.7 oz (48 g)Dimensions: 0.67 x 2.6 x 2.6 inOperating Temperature: -40°C to 85°CFrequency: 1.572 GHz — 1.578 GHzAxial Ratio: 3 dB, max.Peak Gain: 4 dBicBandwidth: 20 MHz, min.Input SWR: 1.5:1, max.Characteristic Impedance: 50Ω  Re-Radiating AmplifierWeight: 9.9 oz (281 g)Dimensions: 1.25 x 3.25 x 2.5 in, max. (not including connectors)Operating Temperature: -57°C to 87°CFrequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩReq. DC Input V.: 3.3 VDC — 15 VDCCurrent Draw: 36 mA, typical (40 mA, max.)Gain: 29 dB — 31 dB (30 dB, typical)Input SWR: 2.0:1Output SWR: 2.0:1, max. (1.8:1, typical)Noise Figure: L1: 2.0 dB L2: 4.25 dBBand Gain Flatness: 0.5 dB, typical (1 dB, max.)Group Delay: L1: 1.5 ns L2: 2.0 nsReverse Isolation: L1: -55 dB L2: -60 dBInput P1dB: L1: -21.5 dBm L2: -23 dBm3rd Order Intercept: -13 dBmSource Voltage Option: 9 VDC — 32 VDC, user supplied (MIL-DTL-5015 10SL Two-Pin DC Connector)Source Option: customConnector Option: TNC type

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: Out of Stock - On Backorder
  • Manufacturer Part #: VGLCDPNRRKIT-TNC/0/MC
$839.99

Find Parts by Aircraft