Out of Stock - On Backorder
GPS L1 NETWORKED RE-RADIATING SYSTEM/N Connector, 110V, with LCD Display and Push Button Control VGLCDHNRRKIT-N
GPS L1 NETWORKED RE-RADIATING SYSTEM/N Connector, 110V, with LCD Display and Push Button Control VGLCDHNRRKIT-NHanger Networked GPS Re-Radiating Kit | N Connectors, 110V Source Input, LCD Display
This GPS re-radiating kit is designed for distributing GPS signals inside a hanger or large spaces without obstruction. GPS L1 signals is received by the include roof antenna, amplified, and then re-radiated indoors using the passive antenna. This hanger GPS re-radiating system consists of an active roof-top antenna, a passive re-radiating antenna, and amplifier with external power supply to power the entire system. In the standard network configuration, the amplifier output (J1) is DC blocked while the antenna port provides DC voltage to power the roof antenna.
This hanger GPS re-radiating kit (Alternate Part# VGLCDHNRR) features N-type connectors, operates from a 110V power source, and a variable gain amplifier with an LCD display.
- High gain amplified roof antenna provides 38 dB gain
- Re-radiating amplifier with external power supply provides 30 dB gain
- Option mounting kit hardware available
- Optional variable gain amplifier with gain from 1 dB to 25 dB
- Optional variable gain amplifier with LCD with gain from 1 dB to 30 dB
Product Codes | |
|---|---|
| Mfr Part No: | VGLCDHNRRKIT-N |
Roof Antenna:Weight: 6.6 ozDimensions: 3.54 x 6.6 inOperating Temperature: -45°C to 85°CdFrequency: 1.575 GHz, typicalGain: 38 dB, typical (30 dB, min.)Bandwidth: 10 MHz, typicalFiltering: -60 dB, typicalNoise Figure: 1.8 dBOutput SWR: 1.5:1, max.Characteristic Impedance: 50ΩReq. DC Input.: 4.5 VDC — 5.5 VDC (5.0 VDC, typical)Current Draw: 20 mA, typical (27 mA, max.) Re-Radiating AntennaWeight: 1.7 oz (48 g)Dimensions: 0.67 x 2.6 x 2.6 inOperating Temperature: -40°C to 85°CFrequency: 1.572 MHz — 1.578 MHz (1.575 MHz, typical)Axial Ratio: 3 dBPeak Gain: 4 dBicBandwidth: 20 MHz, min.Input SWR: 1.5:1, max.Characteristic Impedance: 50Ω  Re-Radiating Amplifier:Weight: 9.6 oz (272 g), max.Dimensions: 1.3 x 3.25 x 2.5 in, max. (not including connectors)Operating Temperature: -57°C to 87°Frequency Response: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩReq. DC Input V.: 3.3 VDC — 15 VDCCurrent Draw: 36 mA, typical (40 mA, max.)Gain: 29 dB — 31 dB (30 dB, typical)Input SWR: 2.0:1, max.Output SWR: 2.0:1, max. (1.8, typical)Noise Figure: L1: 2.0 dB L2: 4.25 dBBand Gain Flatness: 0.5 dB, typical (1.0 dB, max.)Group Delay: L1: 1.5 ns L2: 2.1 nsReverse Isolation: L1: -55 dB L2: -60 dBInput P1dB: L1: -21.5 dBm L2: -23 dBm3rd Order Intercept: -13 dBmSource Voltage Option: 110 VAC, Transformer (ITA Type A Wall Mount)Connector Option: N connector
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: VGLCDHNRRKIT-N
$1,079.99
