CABLE CLAMP KIT/Clam shell size 1 (E), 2 entry, thermoplastic material, 4.06mm cable diameter, sub and micro D connector. 207467-1 pack of 100
CABLE CLAMP KIT/Clam shell size 1 (E), 2 entry, thermoplastic material, 4.06mm cable diameter, sub and micro D connector. 207467-1 pack of 100Unshielded Standard Cable Clamp Kit | #1 Shell Size, 9-Position, Straight/90° Exit
Unshielded cable clamps allow the cable to exit the back shell at a straight/90° angle. They can be used with on either plugs or receptacles and will not interfere with commonly used hardware such as male screw retainers, female screw locks, or spring latches and latching blocks. The hinged assembly allows for easy installation over a wire harness.
This 15-positions, unshielded cable clamp kit (Alternate Part# 207467-1) features a #1 shell size, and a 2-entry cable angle to provide a straight or 90° cable exit for 9-position connectors
- Thermoplastic unshielded, clamp shell housing
- Variable cable entry angle – straight or 90°
- Adjustable screws can tightness cable strain reliefs
- Cable clamp kit assemblies include hardware for convenient plug/receptacle mating
Product Codes | |
|---|---|
| Mfr Part No: | 207467-1 |
| SCHEDULE B CODE: | 8203.20.6060 |
Dimensions: 0.755 x 0.630 in (19.18 x 16 mm)Cable Diameter: 4.06 mmCable Entry Angle: Variable (Straight/90°)Connector Type: D-Sub backshellsNumber of Cable Entry: 2Number of Positions: 9-positionsShell Size: 1(E)Shell Material: thermoplasticShell Plating: plastic
- Stock: Warehouse
- Manufacturer Part #: 207467-1
$0.00
Tags:
cable
, clamp
, kit/clam
, shell
, size
, (e)
, entry
, thermoplastic
, material
, 4.06mm
, diameter
, sub
, and
, micro
, connector.
, 207467-1
, pack
, 100
, install
, supply
