1 ROUND HOLE PUNCH 502067021 ROUND HOLE PUNCH The Greenlee Round Hole Punches make instrument hole cutting for 1", 2-1/4" and 3-1/8" holes quick and easy. Here's how it works: (1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched. (2) Drill proper size pilot hole in the center. (3) Put drive screw through die and pilot hole. (4) Thread on punch until both die and punch are ight against metal. (5) Line up center lines of the hole with marks on outside of the die. (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched. (7) Remove punch from drive screw and the metal halves will fall out. NOTE: You can use the Hydraulic Ram Kit (P/N:7646) with the round hole punches instead of turning the drive screw with a wrench. Product CodesMfr Part No:50206702ECCN:EAR99SCHEDULE B CODE:8203.20.6060..

1-1/4 ROUND HOLE PUNCH 730BB1-1/41-1/4 ROUND HOLE PUNCH The Greenlee Round Hole Punches make instrument hole cutting for 1", 2-1/4" and 3-1/8" holes quick and easy. Here's how it works: (1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched. (2) Drill proper size pilot hole in the center. (3) Put drive screw through die and pilot hole. (4) Thread on punch until both die and punch are ight against metal. (5) Line up center lines of the hole with marks on outside of the die. (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched. (7) Remove punch from drive screw and the metal halves will fall out. NOTE: You can use the Hydraulic Ram Kit (P/N:7646) with the round hole punches instead of turning the drive screw with a wrench. Product CodesMfr Part No:730BB1-1/4ECCN:EAR99SCHEDULE B CODE:8203206060..

14 ZULU TIME WALL CLOCK/Black and white ZT14-314 ZULU TIME WALL CLOCK/Black and whiteBlack Plastic Frame. Clear Plastic Lens. Dimensions:14" diameter, 2" depth, Separate hands indicate12 and 24 hr time. Symbol: ZT14-3Product CodesMfr Part No:ZT14-3ECCN:EAR99SCHEDULE B CODE:9105.19.0000..

14 ZULU TIME WALL CLOCK/Black ZT14-114 ZULU TIME WALL CLOCK/Black Zulu Time Clock allows you to independently set a 12 hour time scale as well as a 24 hour time scale 14" diameter Wall Clock. This 14" diameter Wall Clock is equipped with plastic frame with black painted finish and clear plastic lens.Product CodesMfr Part No:ZT14-1ECCN:EAR99SCHEDULE B CODE:9105.29.0000..

14 ZULU TIME WALL CLOCK/White on black ZT14-414 ZULU TIME WALL CLOCK/White on blackProduct CodesMfr Part No:ZT14-4ECCN:EAR99SCHEDULE B CODE:6109.10.0013..

14 ZULU TIME WALL CLOCK/White ZT14-214 ZULU TIME WALL CLOCK/WhiteBlack Plastic Frame. Clear Plastic Lens. Dimensions:14" diameter, 2" depth, Separate hands indicate12 and 24 hr time. Symbol: ZT14-2Product CodesMfr Part No:ZT14-2ECCN:EAR99SCHEDULE B CODE:9105.19.0000..

2 1/4 inch Panel Mount Chronometer, Aircraft powered, 14V/28V Internal Lighting AST AT420000..

2 1/4 inch Panel Mount Chronometer, Battery powered, 14V/28V Internal Lighting AST AT420100..

2 1/4 inch Recording Tachometer, 2300 RPM Cruise MIT D1-112-5223..

2 1/4 inch Recording Tachometer, 2566 RPM Cruise MIT D1-112-5225..

2 1/8 ROUND HOLE PUNCH 730BB2-1/82 1/8 ROUND HOLE PUNCH The Greenlee Round Hole Punches make instrument hole cutting for 1", 2-1/4" and 3-1/8" holes quick and easy. Here's how it works: (1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched. (2) Drill proper size pilot hole in the center. (3) Put drive screw through die and pilot hole. (4) Thread on punch until both die and punch are ight against metal. (5) Line up center lines of the hole with marks on outside of the die. (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched. (7) Remove punch from drive screw and the metal halves will fall out. NOTE: You can use the Hydraulic Ram Kit (P/N:7646) with the round hole punches instead of turning the drive screw with a wrench. Product CodesMfr Part No:730BB2-1/8ECCN:EAR99SCHEDULE B CODE:8203206060..

2 AXIS MANUAL TILT TABLE 227545-21310-L Two-Axis Manual Tilt Table | 80°The 1310-L Manual Tilt and Turn Table consists of two axes of motion, one for tilting and the other for rotating the table. It can be tilted in either direction from 0 to 80, or 0 to 90, depending upon the model. Rotating the handle in the desired direction will change the tilt six degrees per revolution.The vernier on the tilt axis is readable to one minute of arc with the vernier adjustable to 5. There are engraved marks at 0.5 increments on the tilt axis.The table top rotates continuously through 360 in a clockwise or counter-clockwise direction. Engraved marks are provided at 45 increments on the table top; engraved marks at 1 increments are optional. A spring-loaded steel ball engages detents in the bottom of the table top, locking it into position for quick setup. The detents are located every 45. Tables with optional engraved marks every 1 have detents every 15. The tension is adjustable for the positioning detents on the tabletop.The table includes two one-minute sensitive levels on the table base for a more accurately leveled table surface. A level platform is achieved by adjusting the leveling screws, which are mounted through the base plate. The leveling feet can compensate for as much as 5 of tilt.The top surface of the table has six tapped holes for attaching the instrument package to be tested. Simply center the instrument package on the table top and secure it. Knurled mounting screws (1/4 - 20) may be purchased separately.This 2-Axis tilt table (Alternate Part# 1310-L) has a tilt range of 80° and an engraved increment on azimuth axis of 45°.Compact and lightweight for easy bench mounting and manual operationTwo-degrees of freedom for tilt and rotational testingSpring loaded detents provide accurate tabletop rotary indexingFlat, precision ground tabletop mounting surfaceSensitive bubble levels included for accurate levelingKnurled mounting screws available for easy instrument mountingProduct CodesMfr Part No:227545-2ECCN:7B994SCHEDULE B CODE:9031.80.8080Weight: ±80°: 21 lb ±90°: 22.5 lb Dimensions: ±80°: 14.7 x 10.6 x 10.1 in (373 x 269 x 257 mm)   ±90°: 14.7 x 10.6 x 11.8 in (373 x 269 x 300 mm) Tabletop diameter: 8 in (203 mm) Load capacity: 30 lb (13.6 Kg) Leveling range: ±2.5° Table tilt range: Standard: ±80° -90 Model: -90° Tilt axis accuracy: ±3% arc minutes Engraved increment on tilt axis: 0.5° Tilt scale vernier resolution: 1 arc minute Azimuth rotation range: ±360° Azimuth axis accuracy: ±6 arc minutes Engraved increments on azimuth axis: Standard: 45° -1 Model: 1° Turn indexing detents increment: Standard: 45° -1 Model: 15° Leveling sensitivity: 1 arc minute Type of finish Black: anodizing per MIL-A-8625 Type II Class 2..

2 AXIS TILT TABLE 1310-1-L2 AXIS TILT TABLEThe 1310-L Manual Tilt and Turn Table consists of two axes of motion, one for tilting and the other for rotating the table. It can be tilted in either direction from 0 to 80, or 0 to 90, depending upon the model. Rotating the handle in the desired direction will change the tilt six degrees per revolution. The vernier on the tilt axis is readable to one minute of arc with the vernier adjustable to 5. There are engraved marks at 0.5 increments on the tilt axis.The table top rotates continuously through 360 in a clockwise or counter-clockwise direction. Engraved marks are provided at 45 increments on the table top; engraved marks at 1 increments are optional. A spring-loaded steel ball engages detents in the bottom of the table top, locking it into position for quick setup. The detents are located every 45. Tables with optional engraved marks every 1 have detents every 15. The tension is adjustable for the positioning detents on the tabletop. The table includes two one-minute sensitive levels on the table base for a more accurately leveled table surface. A level platform is achieved by adjusting the leveling screws, which are mounted through the base plate. The leveling feet can compensate for as much as 5 of tilt. The top surface of the table has six tapped holes for attaching the instrument package to be tested. Simply center the instrument package on the table top and secure it. Knurled mounting screws (1/4 - 20) may be purchased separately. Model 1310-1-L: Tilt Range: 80 Engraved increment on azimuth axis: 1 Product CodesMfr Part No:1310-1-LECCN:7B994SCHEDULE B CODE:9031.80.8080..

2 ROUND HOLE PUNCH 730BB-22 ROUND HOLE PUNCH The Greenlee Round Hole Punches make instrument hole cutting for 1", 2-1/4" and 3-1/8" holes quick and easy. Here's how it works: (1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched. (2) Drill proper size pilot hole in the center. (3) Put drive screw through die and pilot hole. (4) Thread on punch until both die and punch are ight against metal. (5) Line up center lines of the hole with marks on outside of the die. (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched. (7) Remove punch from drive screw and the metal halves will fall out. NOTE: You can use the Hydraulic Ram Kit (P/N:7646) with the round hole punches instead of turning the drive screw with a wrench. Product CodesMfr Part No:730BB-2ECCN:EAR99SCHEDULE B CODE:8203206060..

2-1/4 ROUND HOLE PUNCH 730BB-2-1/42-1/4 ROUND HOLE PUNCH The Greenlee Round Hole Punches make instrument hole cutting for 1", 2-1/4" and 3-1/8" holes quick and easy. Here's how it works: (1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched. (2) Drill proper size pilot hole in the center. (3) Put drive screw through die and pilot hole. (4) Thread on punch until both die and punch are ight against metal. (5) Line up center lines of the hole with marks on outside of the die. (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched. (7) Remove punch from drive screw and the metal halves will fall out. NOTE: You can use the Hydraulic Ram Kit (P/N:7646) with the round hole punches instead of turning the drive screw with a wrench. Product CodesMfr Part No:730BB-2-1/4ECCN:EAR99SCHEDULE B CODE:8203206060..

2020 EDMO AEA CLOCK - NASHVILLE AEA CLOCK. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AEA CLOCK against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

24 HOUR CLOCK/10, White face with black DSP-0324 HOUR CLOCK/10, White face with black Zulu Dual Time 12-24 Time Clock, 10" Diameter, 2" Depth, Black Plastic Frame, This clock allows you to independently set 12 hour time scale as well as 24 hour time scaleProduct CodesMfr Part No:DSP-03ECCN:EAR99SCHEDULE B CODE:9105.19.0000..

24 HOUR CLOCK/Black face DSP-0124 HOUR CLOCK/Black face Product CodesMfr Part No:DSP-01SCHEDULE B CODE:9105.19.0000..

24 HOUR CLOCK/White face DSP0224 HOUR CLOCK/White face Product CodesMfr Part No:DSP02ECCN:EAR99SCHEDULE B CODE:9105.19.0000..

3 1/8 inch Marked Recording Tachometer, 2300 RPM Cruise, 500-2700 Green, 2700 Red MIT RT7-M..