1 inch Square White & Black UltraCote Covering, 78 inch Roll HAN U930..

1 inch Square White & Red UltraCote Covering, 78 inch Roll HAN U932..

1/2 inch Square Yellow & Black UltraCote Covering, 78 inch Roll HAN U936..

100' LENGTH OF M27500-20TG2T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-20TG2T14M27500-20TG2T14 Extruded ETFE Tefzelâ„¢ Wire | 20 AWG, 2-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-20TG2T14 Tefzelâ„¢ wire (Alternate Part# 20TG2T14) meets SAE AS22759/18 specifications and is a 20 gauge, shielded, 2-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-20TG2T14MIL SPEC:M27500-20TG2T14ECCN:EAR99MIL SPEC:M27500-20TG2T14SCHEDULE B CODE:8544110050SAE AS22759/18 SPECIFICATIONS: Gauge: 20 AWG Number of Strands: 19 Strand Size: 32 Outside Diameter (Insulation): 0.049 - 0.053 in Conductor Diameter: 0.038 in Weight: 4.60 LB/MFT Impedance (@ 20°C): 9.8 Ω/MFT, maximum Number of Conductors: 2, (20TG2T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14) : Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG1T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG1T14M27500-22TG1T14 Extruded ETFE Tefzelâ„¢ Wire | 22 AWG, 1-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-22TG1T14 Tefzelâ„¢ wire (Alternate Part# 22TG1T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 1-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG1T14MIL SPEC:M27500-22TG1T14ECCN:EAR99MIL SPEC:M27500-22TG1T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 1, (22TG1T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14): Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG3T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG3T14M27500-22TG3T14 Extruded ETFE Tefzel Wire | 22 AWG, 3-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.This M27500-22TG2T14 Tefzelâ„¢ wire (Alternate Part# 22TG3T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 3-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG3T14MIL SPEC:M27500-22TG3T14ECCN:EAR99MIL SPEC:M27500-22TG3T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 3, (22TG3T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14) – Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14) : Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG4T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG4T14M27500-22TG4T14 Extruded ETFE Tefzelâ„¢ Wire | 22 AWG, 4-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-22TG4T14 Tefzelâ„¢ wire (Alternate Part# 22TG4T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 4-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG4T14MIL SPEC:M27500-22TG4T14ECCN:EAR99MIL SPEC:M27500-22TG4T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 4, (22TG4T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14): Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

107 inch Suncover for 28% Decathlon PRC SC-DEC28. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number PRC SC-DEC28 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

120cc Suncover for Aerobatic Models, fits Laser 103 inch Airplanes PRC SC120-A..

120cc Suncover for Aerobatic Models, fits Slick/330SC 103 inch, 330LX 107 inch Airplanes PRC SC120-B..

170cc Suncover for Aerobatic Models PRC SC170-A. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number PRC SC170-A against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

2 inch Squares Black & White UltraCote Covering, 78 inch Roll HAN U941..

2.2m Suncover for Sport Jets PRC SC-SJ22. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number PRC SC-SJ22 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

26% 74 inch Slick 360 Green/Blue ARF PRC SLK26-P02..

26% 74 inch Slick 360 Red/Yellow/Black ARF PRC SLK26-P01..

26% 78 inch Extra 330NG Blue/Red ARF PRC E330NG 26-P01..

26% 78 inch Extra 330NG Green/Carbon ARF PRC E330NG 26-P02..

26% 78 inch Extra 330NG Orange/Purple ARF PRC E330NG 26-P03..

26% 78 inch Extra 330NG Red/Silver ARF PRC E330NG 26-P04..

31% 90 inch Extra 330NG Blue/Red ARF PRC E330NG 31-P01..