The DC PRO-X2 true crossover headset is ideal for both general aviation and commercial pilots that prefer the unmatched comfort of a lightweight, rest-on-ear design. The next generation DC PRO-X2 Series retains all the comfort and performance features of the original, pilot-acclaimed DC PRO-X headsets; now with enhanced ANR and audio performance. A fully adjustable suspension assembly is integrated into the headband for a personal fit. Swivel hinge stirrups disperse clamping pressure, allowing the headset to conform to the users head. Hybrid ENC technology provides active noise reduction (ANR) with feed-forward/feed-back technology, and an external microphone on the dome picks up outside noise for superior noise attenuation.
Version (Alternate Part# 43105G-01) is a dual ear ENC headset with M-5B electret microphone, bluetooth, and a dual plug.
- Enhanced Auto-Shutoff feature virtually eliminates accidental loss of battery power
- Automatic Gain Control (AGC) for optimum ANR performance in changing, high noise conditions
- Soft, Outlast® technology, heat absorbing head pad keeps cool and comfortable in flight
- Hybrid ENC technology for excellent active noise reduction
- Plush, rest-on-ear (supra aural), leatherette ear seals reduce heat buildup
- Rugged, yet lightweight alloy suspension, less than 8 ounces
- Compact control module with intuitive, multi-function control pad
- FAA TSO-C139a Approved
Product Codes | |
|---|---|
| Mfr Part No: | 46105G-01 |
Weight w/o cable: 7.5 oz. (215 g)Ear coupling: On-the-earHardware: Lightweight Alloy Connector Type: Standard dual GA plugsConnection Cable: 0.155†(4-mm) OD shielded cable, length ~  6.9 ft. (2.1 m) Battery life: Up to 50 hours (2 AA batteries)Operating temperature: -20°C to +55°C Operating voltage: 3VDC (2x AA)Dome type: ABS Characteristic SPL: 91 dB SPL (1 kHz, 1 mW) @ maximum volume nominal Contact pressure: 0.6 lb. (2.7 N) ENC peak attenuation: 30dB @ 150HzENC attenuation range: 20Hz―1KHzTotal harmonic distortion (THD): < 1% - 110 dB SPL (300 - 3,000 Hz)Ear Transducer principle: DynamicEar Impedance:600 Ω mono / 1200 Ω stereo (each ear) Ear Freq Response: 12 - 15,000 HzMicrophone principle: Pre-polarized condenser microphone (electret), noise cancelling Mic Impedance: 150Ω nominalMic Sensitivity: 400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input Mic Freq Response: 150 - 8,000 HzMic DC Supply V: 8-16V, not polarity sensitiveSource Resistance: 470Ω
- Stock: Warehouse
- Manufacturer Part #: 46105G-01
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
