GPS Splitter/With Tnc connector. Passive, one input, two output. Mil Spec. MIL-LDCBS1X2-TNC

The MIL-LDCBS1X2 military GPS splitter features a one input and two output for splitting RF frequencies from 1.1 GHz — 1.7 GHz. This mil-spec splitter is designed to passively GPS signals within the L-Band to provided multiple devices with GPS signal from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. All Mil-Spec splitters are qualified to meet the rigorous standards MIL-STD 810F environmental & MIL-STD-461F EMI standards.
 

This mil-spec GPS splitter (Alternate Part# MILLDCBS-T) features one input & two outputs, and has TNC-type connectors. 

• Precise amplitude balance: < 1 dB variation between ports
• Flat group delay: < 1 ns  between L1 & L2 bands
• Low insertion loss: -4.0 dB loss across operating frequencies
• Wide accepted frequency range: covering entire L-band & major GNSS constellations
• Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults
• Matched phase balance: < 2° variation between ports
• Qualification and test reports available

Weight: 10.2 lb, max. Dimensions: 1.3 x 3.25 x 2.5 in (without connectors) Operating Temperature: -57°C to 87°C Housing base plate Finish: electroless nickel-plated (MIL-C-26074C, class 1) Frequency Range: 1.1 GHz — 1.7 GHz Characteristic Impedance: 50Ω Input SWR: 2.0:1, max. Output SWR: 2.0:1, max. Insertion Loss: -3.0 dB to -5.0 dB (-4.0 dB, typical) Gain Flatness: 0.25 dB, typical (1.0 dB, max.) Amplitude Balance: 0.10 dB, typical (1.0 dB, max.) Phase Balance: 1.0°, typical (2.0°, max.) Isolation: L1: 22 dB L2: 15 dB Group Delay Flatness: 0.10 ns, typical (1.0 ns, max.) Connector Option: TNC-type female