Insulation Resistance Tester/Provided with Calibration Certificate Fluke-1507

The Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications. Additional features, like the remote probe, save both time and money especially when performing repetitive tests.

Includes:

TL224 Test Leads, TP74 Test Probes, clips (red & black), holster and remote probe

Features:

• Performs insulation tests from 0.01 MΩ to 2.0 GΩ
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Includes auto-discharge of capacitive voltage for added user protection
• Measures AC/DC voltage from 0.1 V to 600 V and resistance from 0.01 Ω to 20.00 kΩ
• Provides lo-ohms earth-bond continuity (200 mA)
• Simplifies repetitive or hard-to-reach testing with the remote test probe
• Saves battery power with auto power off
• Presents results on a large, backlit display
• Features CAT IV 600 V overvoltage category rating
• Comes with remote probe, test leads, test probes, alligator clips and one-year warranty
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests

Weight: 550 g (1.2 lb) Dimensions: 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in) IP rating: IP40 Altitude: Operating: 2000 m CAT IV 600 V, 3000 m CAT III 600 V Non-operating (storage): 12,000 m Vibration: Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument Shock: 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor) Maximum voltage applied to any terminal: 600 V AC rms or DC AC/DC Voltage Measurement Accuracy: Range: 600.0 V Resolution: 0.1 V 50 Hz to 400 Hz ± (% of Rdg + Digits): ±(2% + 3) Input impedance: 3 MΩ (nominal), < 100 pF Common mode rejection ratio (1 kΩ unbalanced): > 60 dB at DC, 50 or 60 Hz Overload protection: 600 V rms or DC Earth Bond Resistance Measurement Range/Resolution: 20.00 Ω : 0.01 Ω 200.0 Ω : 0.1 Ω 2000 Ω : 1.0 Ω 20.00 kΩ : 0.01 kΩ Accuracy: ±(1.5% + 3) Overload protection: 2 V rms or DC Open circuit test voltage: > 4.0 V, < 8 V Short circuit current: > 200.0 mA Insulation Specifications Measurement range: 0.01 MΩ to 10 GΩ Test voltage: 50 V, 100 V, 250 V, 500 V, 1000 V Test voltage accuracy: + 20%, - 0% Short circuit current: 1 mA nominal Auto discharge Discharge time: < 0.5 second for C = 1 µF or less Live circuit indicator: Inhibit test if terminal voltage > 30 V prior to initialization of test Maximum capacitive load: Operable with up to 1 µF load Measure accuracy: 50 V ±(3% + 5) 100 V ±(3% + 5) 250 V ±(1.5% + 5) 500 V ±(1.5% + 5) 1000 V ±(1.5% + 5) to 2000 MΩ, ±(10% + 3) above 2000 MΩ