The Fluke 87V True-RMS Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations.
On top of that, this industrial multimeter effectively performs in loud, high energy, and high altitude locations. Features a low pass filter which supports precise frequency measurements on VFDs and acquires intermittents as quickly as 250 µS.
Use this multimeter to measure AC currents up to 10 A directly. Also, features a built-in thermometer that enables you to take temperature readings without having to carry a separate instrument and more. Plus, comes with a bright, two-level backlit display which allows you to see the results better in dim light.
- Supports accurate measurements on VFDs using a low-pass filter
- Captures intermittents as fast as 250 µS with Peak Capture
- Blocks high-frequency, high-energy noise generated by large drive systems with specially designed shielding
- Removable holster with built in test lead and probe storage for convenience
- Offers relative mode to remove test lead interference from low ohms measurements
- All the inputs in the 87V are updated to the third edition of the EN 61010-1 to 1000 V CAT III and 600 V CAT IV
- Designed to withstand spikes of more than 8000 V
- Audible Input Alert warning against wrong use of input jacks
- Comes with a lifetime warranty
- Easy access door for fast battery changes without breaking the calibration seal
- 6,000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
Product Codes | |
|---|---|
| Mfr Part No: | FLUKE 87V |
| CE: | YES |
| CSA: | YES |
| ECCN: | 3A992 |
| SCHEDULE B CODE: | 9030.31.0000 |
| UL: | YES |
Weight: 355 gDimensions: 201 x 98 x 52 mmBattery Life: Alkaline ~400 hours typical, without backlightShock: 1 Meter drop per IEC 61010–1:2001Vibration: Per MIL–PRF–28800 for a Class 2 instrumentOperating temperature: –20 °C to + 55 °CStorage temperature: –40 °C to + 60 °CHumidity (without condensation): 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C)Operating Altitude: 2000 mOvervoltage category: EN 61010–1 to 1000 V CAT III, 600V CAT IVAgency approvals: CE, CSA, RCM
- Stock: Out of Stock
- Manufacturer Part #: FLUKE 87V
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
