This GPS network line amplifier provides 20 dB gain and has one active input and one output that s optimized for boosting GPS signals. This GPS amplifier accepts signals covering all major GNSS constellations with excellent gain flatness and a very low noise figure. In the standard configuration, the J1 port accepts DC voltage from a connected GPS receiver and passes this voltage through to power the internal amplifier while unregulated voltage is passed through the antenna port to up stream devices. In networked configuration (externally powered), the output J1 port is DC blocked, and a customer-defined output voltage is provided via the antenna port.
This network line amplifier (Alternate Part# NLA30RPDC) provides 30 dB of gain and has N connectors.
- High output gain: 30 dB typical
- Customizable fixed output gain from 1 dB to 30 dB
- Wide accepted frequency range: accepts entire L-band covering major GNSS constellations
Product Codes | |
|---|---|
| Mfr Part No: | NLA30RPDC |
Weight: 9.2 oz (260 g)Dimensions: 1.3 x 3.25 x 2.5 in, max. (not including connectorsOperating Temperatures: -57°C to 87°CFrequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩReq. DC Input V.: 3.3 VDC — 15 VDCCurrent Draw: 36 mA, typical (40 mA, max.)Gain: 29 dB — 31 dB, (30 dB, typical)Input SWR: 2.0:1Output SWR: 1.8:1Noise Figure: L1: 2.0 dB L2: 4.24 dBBand Gain Flatness: 0.5 dB, typical (1.0 dB, max.)Group Delay: L1: 1.5 ns L2: 2.1 nsReverse Isolation: L1: -55 dB L2: -60 dBInput P1dB: L1: -21.5 dBm L2: -23.0 dBm3rd Order Intercept: -14 dBmSource Voltage Option: 110VAC Transformer (ITA Type A Wall Mount)Output Voltage Option: 5V @ 130 mAConnector Option: N connector
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: NLA30RPDC
