The MIL-LDCBS1X2 military GPS splitter features a one input and two output for splitting RF frequencies from 1.1 GHz — 1.7 GHz. This mil-spec splitter is designed to passively GPS signals within the L-Band to provided multiple devices with GPS signal from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. All Mil-Spec splitters are qualified to meet the rigorous standards MIL-STD 810F environmental & MIL-STD-461F EMI standards.
This mil-spec GPS splitter (Alternate Part# MIL-LDCBS) features one input & two outputs, and has N-type connectors.
- Precise amplitude balance: < 1 dB variation between ports
- Flat group delay: < 1 ns between L1 & L2 bands
- Low insertion loss: -4.0 dB loss across operating frequencies
- Wide accepted frequency range: covering entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents antenna alarm fauls
- Matched phase balance: < 2° variation between ports
- Qualification and test reports available
Product Codes | |
|---|---|
| Mfr Part No: | MIL-LDCBS1X2-N |
Weight: 10.2 lb, max.Dimensions: 1.3 x 3.25 x 2.5 in (without connectors)Operating Temperature: -57°C to 87°CHousing base plate Finish: electroless nickel-plated (MIL-C-26074C, class 1)Frequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩInput SWR: 2.0:1, max.Output SWR: 2.0:1, max.Insertion Loss: -3.0 dB to -5.0 dB (-4.0 dB, typical)Gain Flatness: 0.25 dB, typical (1.0 dB, max.)Amplitude Balance: 0.10 dB, typical (1.0 dB, max.)Phase Balance: 1.0°, typical (2.0°, max.)Isolation: L1: 22 dB L2: 15 dBGroup Delay Flatness: 0.10 ns, typical (1.0 ns, max.)Connector Option: N-type female
- Stock: Out of Stock
- Manufacturer Part #: MIL-LDCBS1X2-N
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
