LAMP CAP ASSEMBLY and SWITCH BODY / Alternate Action, Legend Text: LOW FDC, PRESSURE BYPASS, Legend Color: Amber/ White. 4944-6934..

PELICAN STORAGE CASE/Green, no foam, Interior Dimensions: 21.43 x 16.5 x 7.87, Exterior Dimensions: 24.25 x 19.43 x 8.68, watertight, crush proof and dust proof, o-ring seal, automatic pressure equalization valve, stainless steel hardware 1600-001-1301600 Large Protector Case / Green / No FoamThe Pelican 1600 large protector case is unbreakable, watertight, airtight, dust-proof, chemical resistant, and corrosion proof. This case is made of Ultra High Impact structural copolymer and features a quarter-inch neoprene o-ring and ABS latches that seal perfectly. It also includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Part 1600GNF is a green case with no foam.Watertight, crushproof, and dust proofOpen cell core with solid wall designAutomatic pressure equalization valveO-ring sealComfortable rubber over-molded handleStainless steel hardware and padlock protectorsLifetime guarantee of excellenceProduct CodesMfr Part No:1600-001-130ECCN:EAR99SCHEDULE B CODE:3923.10.0000Weight: 13 lb Interior Dimensions: 21.43 x 16.5 x 7.87 in Exterior Dimensions: 24.25 x 19.43 x 8.68 in Buoyancy: 117 lb Body: Polypropylene Latch: ABS O-Ring: Polymer Pins: Stainless Steel..

RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MCVariable gain portable networked re-radiating kit with LCD | TNC Connectors, 9VDC—32VDC Ouput VoltageThis variable gain portable networked re-radiating kit is designed to re-distribute GPS signals where an L1 antenna is already in use. Portable re-radiating kits consists of a re-radiating antenna, an amplifier with external power supply for powering the entire system. In the standard networked configuration, the re-radiating amplififer output J1 is DC blocked while the antenna port receives RF signal and passes DC voltage back to power an active antenna.  Custom gain, DC power, and connector configurations are available. This portable GPS re-radiating kit (Alternate Part# VGLCDPNRRK) features variable gain with LCD display, TNC connectors,  and 9 VDC — 32 VDC MIL-DTL-5015 10SL source power. Re-radiating amplifier with external power supply: 30 dB typical gainOption mounting kit hardwareOptional variable gain amplifier: adjustable from 1 dB — 25 dBOptional variable gain amplifier with LCD: adjustable from 1 dB — 30 dBProduct CodesMfr Part No:VGLCDPNRRKIT-TNC/0/MCRe-Radiating Antenna: Weight: 1.7 oz (48 g) Dimensions: 0.67 x 2.6 x 2.6 in Operating Temperature: -40°C to 85°C Frequency: 1.572 GHz — 1.578 GHz Axial Ratio: 3 dB, max. Peak Gain: 4 dBic Bandwidth: 20 MHz, min. Input SWR: 1.5:1, max. Characteristic Impedance: 50Ω   Re-Radiating Amplifier Weight: 9.9 oz (281 g) Dimensions: 1.25 x 3.25 x 2.5 in, max. (not including connectors) Operating Temperature: -57°C to 87°C Frequency Range: 1.1 GHz — 1.7 GHz Characteristic Impedance: 50Ω Req. DC Input V.: 3.3 VDC — 15 VDC Current Draw: 36 mA, typical (40 mA, max.) Gain: 29 dB — 31 dB (30 dB, typical) Input SWR: 2.0:1 Output SWR: 2.0:1, max. (1.8:1, typical) Noise Figure: L1: 2.0 dB L2: 4.25 dB Band Gain Flatness: 0.5 dB, typical (1 dB, max.) Group Delay: L1: 1.5 ns L2: 2.0 ns Reverse Isolation: L1: -55 dB L2: -60 dB Input P1dB: L1: -21.5 dBm L2: -23 dBm 3rd Order Intercept: -13 dBm Source Voltage Option: 9 VDC — 32 VDC, user supplied (MIL-DTL-5015 10SL Two-Pin DC Connector) Source Option: custom Connector Option: TNC type..

SOLDER SLEEVE SHIELD TERMINATOR/Maximum temperature: +150 degrees Celsius,minimum shrink temperature: +125 degrees Celsius. D-101-00 pack of 100Solder Sleeve Shield Terminal | 0.018 – 0.200inSolder sleeve shield terminals provide a reliable method of terminating a wide variety of coaxial cables and screens. They can be used for wire-to-wire, wire-to-pin connections, and triaxial cable assemblies. STS are designed to solder, seal terminations, provide strain relief and are installed by the application of heat.  This shield terminal (Alternate Part# D-101-00) fits cables with a 0.018 – 0.200 inch jacket diameter. Meets NAS-1747 standards125°C minimum temperature ratingConvection or infrared installation procedureProduct CodesMfr Part No:D-101-00ECCN:EAR99SCHEDULE B CODE:8536.90.4000Cable Size: 0.018 – 0.200 in (4.55 – 5.00 mm) Insulation Material: Radiation cross-linked polyvinylidene fluoride Solder Preform (with Flux): Sn63 Pb37 solder alloy Thermal Indicator: violet Meltable Ring: Thermally stabilized thermoplastic Temperature Range: -55°C to 150°C..

.079 CHISEL TIP FOR WSTA3 & WPA2 SOLDERING TOOLS WPT2WPT2 Tapered Soldering Tip | 0.079in, for WSTA3 & WPA2 Pyropen Soldering ToolThe WPT2 soldering tip features a tapered needle and is designed for the WSTA3 and WPA2 Pyropen soldering tool.Designed for the WST3 and WPA Pyropen soldering toolChisel soldering tipProduct CodesMfr Part No:WPT2Tip Style: chisel Tip Width: 0.079 in (2 mm) Tip Reach: 0.72 in (18.29 mm) Temperature: 392°F to 932°F..

.20 TAPER NEEDLE TIP FOR WSTA3/WPA2 PYROPEN JR. SOLDERING TOOL WPT15WPT15 Tapered Soldering Tip | 0.02 in, for WSTA3 & WPA2 Pyropen Soldering ToolThe WPT15 soldering tip features a tapered needle and is designed for the WSTA3 and WPA2 Pyropen soldering tool.Designed for the WST3 and WPA Pyropen soldering toolTaper needle soldering tipProduct CodesMfr Part No:WPT15Tip Style: taper needle Tip Width: 0.02 in (0.51 mm) Tip Reach: 0.551 in (14 mm) Temperature Range: 392°F to 842°F..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CARB. TEMP (-50)-50°C B&W (UMA probe) N12118U050C0001 1/4" CARB. TEMPDial Range:(-50)-50°CDial Markings and Colors:B&W (UMA probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CARB. TEMP. (-60)- 120°F B&W (UMA probe) N12118U120F0001 1/4" CARB. TEMP.Dial Range:(-60)- 120°FDial Markings and Colors:B&W (UMA probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CHT 100-300°F B&W (UMA probe) N12116U300F0001 1/4" CHTDial Range:100-300°FDial Markings and Colors:B&W (UMA probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CHT 100-300°F B&W (VDO probe) N12116V300F0001 1/4" CHTDial Range:100-300°FDial Markings and Colors:B&W (VDO probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CHT 100-600°F B&W (Thermocouple Type J) N12116J600F0001 1/4" CHTDial Range:100-600°FDial Markings and Colors:B&W (Thermocouple Type J)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CHT 40-150°C B&W (UMA probe) N12116U150C0001 1/4" CHTDial Range:40-150°CDial Markings and Colors:B&W (UMA probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CHT 40-150°C B&W (VDO probe) N12116V150C0001 1/4" CHTDial Range:40-150°CDial Markings and Colors:B&W (VDO probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" CHT 50-300°C B&W (Thermocouple Type J) N12116J530C0001 1/4" CHTDial Range:50-300°CDial Markings and Colors:B&W (Thermocouple Type J)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" EGT 100-900°C B&W (Thermocouple Type K) N12117K19CC0001 1/4" EGTDial Range:100-900°CDial Markings and Colors:B&W (Thermocouple Type K)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" EGT 1000-2000°F B&W (Thermocouple Type K) N12117K2K0F0001 1/4" EGTDial Range:1000-2000°FDial Markings and Colors:B&W (Thermocouple Type K)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" O.A.T. (-10)-110°F B & W (1B2-1 probe & 6' harness included) N12119U110F0001 1/4" O.A.T. Dial Range:(-10)-110°FDial Markings and Colors:B & W (1B2-1 probe & 6' harness included)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" OIL TEMP. 100-300°F B&W (UMA probe) N12113U300F0001 1/4" OIL TEMP.Dial Range:100-300°F Dial Markings and Colors:B&W (UMA probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" OIL TEMP. 100-300°F B&W (VDO probe) N12113V300F0001 1/4" OIL TEMP.Dial Range:100-300°FDial Markings and Colors:B&W (VDO probe)..

1 1/4 ELEC. TEMPERATURE W/ DB-9 CONNECTOR 1 1/4" OIL TEMP. 40-150°C B&W (UMA probe) N12113U150C0001 1/4" OIL TEMP.Dial Range:40-150°CDial Markings and Colors:B&W (UMA probe)..