RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MCVariable gain portable networked re-radiating kit with LCD | TNC Connectors, 9VDC—32VDC Ouput VoltageThis variable gain portable networked re-radiating kit is designed to re-distribute GPS signals where an L1 antenna is already in use. Portable re-radiating kits consists of a re-radiating antenna, an amplifier with external power supply for powering the entire system. In the standard networked configuration, the re-radiating amplififer output J1 is DC blocked while the antenna port receives RF signal and passes DC voltage back to power an active antenna.  Custom gain, DC power, and connector configurations are available. This portable GPS re-radiating kit (Alternate Part# VGLCDPNRRK) features variable gain with LCD display, TNC connectors,  and 9 VDC — 32 VDC MIL-DTL-5015 10SL source power. Re-radiating amplifier with external power supply: 30 dB typical gainOption mounting kit hardwareOptional variable gain amplifier: adjustable from 1 dB — 25 dBOptional variable gain amplifier with LCD: adjustable from 1 dB — 30 dBProduct CodesMfr Part No:VGLCDPNRRKIT-TNC/0/MCRe-Radiating Antenna: Weight: 1.7 oz (48 g) Dimensions: 0.67 x 2.6 x 2.6 in Operating Temperature: -40°C to 85°C Frequency: 1.572 GHz — 1.578 GHz Axial Ratio: 3 dB, max. Peak Gain: 4 dBic Bandwidth: 20 MHz, min. Input SWR: 1.5:1, max. Characteristic Impedance: 50Ω   Re-Radiating Amplifier Weight: 9.9 oz (281 g) Dimensions: 1.25 x 3.25 x 2.5 in, max. (not including connectors) Operating Temperature: -57°C to 87°C Frequency Range: 1.1 GHz — 1.7 GHz Characteristic Impedance: 50Ω Req. DC Input V.: 3.3 VDC — 15 VDC Current Draw: 36 mA, typical (40 mA, max.) Gain: 29 dB — 31 dB (30 dB, typical) Input SWR: 2.0:1 Output SWR: 2.0:1, max. (1.8:1, typical) Noise Figure: L1: 2.0 dB L2: 4.25 dB Band Gain Flatness: 0.5 dB, typical (1 dB, max.) Group Delay: L1: 1.5 ns L2: 2.0 ns Reverse Isolation: L1: -55 dB L2: -60 dB Input P1dB: L1: -21.5 dBm L2: -23 dBm 3rd Order Intercept: -13 dBm Source Voltage Option: 9 VDC — 32 VDC, user supplied (MIL-DTL-5015 10SL Two-Pin DC Connector) Source Option: custom Connector Option: TNC type..

0-35k Altitude Encoder, Gray Code and Serial, TSO AIS SAE5-35..

02A21047 LYCOMING TEE - .250 TUBE TO .125 NPT 02A21047..

02A21169 LYCOMING ELBOW - .375 FL TUBE - 90 DEG. 02A21169..

02A21171 LYCOMING TEE - .250 TUBE WITH .125 NPT ON 02A21171..

02A21377 LYCOMING ELBOW - .125 NPT TO #3 TUBE - 45 02A21377..

02A21378 LYCOMING ELBOW - .250 TUBE TO .125 NPT 45 02A21378..

02A21380 LYCOMING ELBOW - .125 NPT TO .1875 TUBE - 9 02A21380..

02A21381 LYCOMING TEE - .125 NPT TO .1875 TUBE - RES 02A21381..

02A22358 LYCOMING ELBOW - (-8)FL.TUBE TO .25 NPT 02A22358..

02A22542 LYCOMING ELBOW - .125 NPT TO .250 TUBE - RS 02A22542..

02A22619 LYCOMING ELBOW - .125 NPT TO .250 FL TUBE 02A22619..

02A22992 LYCOMING TEE - .250 TUBE OD WITH SWIVEL NUT ON ONE END 02A22992..

02A23027 LYCOMING ELBOW 45 DEG-.375 NPT TO .625 FL. TUBE 02A23027..

07C23076 LYCOMING CLAMP - OIL FILLER TUBE 07C23076..

1 ROUND ALUMINUM CLAMP MS28042-4AMS28042-4A Round Clamp | 1in Diameter, 1in Depth, Anodized FinishMSP avionics clamps eliminate the need for panel removal when repairing or replacing an instrument such as an altimeter or artificial horizon. These patented chem film and anodized finished clamps are rust proof for up to 25 years; made from lightweight, non-conductive aluminum, they make retrofits simpler and faster as well as making the instrument more secure in the panel.This avionics clamp (Alternate Part# MS28042-4A) measures 1 inch in diameter, with a 1-inch mounting depth and constructed of light weight aluminum with an anodized finish.Simplifies avionic equipment retrofits for replacement or repairDoes not require removal of the entire panelAnti-corrosion Chem-film, anodized aluminum finishProduct CodesMfr Part No:MS28042-4AMIL SPEC:MS28042-4AECCN:EAR99MIL SPEC:MS28042-4ASCHEDULE B CODE:7606.92.0050Shape: Round Size: 1 inch diameter Depth: 1 in Material: Aluminum Finish: Anodized..

1.20ci 3 cylinder Radial Engine SAI E120R3. Engine cylinder assembly or component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number SAI E120R3 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

1.5 RD ALUM PER 9M1029-3A REVBCHEM FILM FINISH 6454464544 Round Avionic Clamp | 1.5in Diameter, 1in Depth Chem-Film Anodized FinishMSP avionics clamps eliminate the need for panel removal when repairing or replacing an instrument such as an altimeter or artificial horizon. These patented chem film and anodized finished clamps are rust proof for up to 25 years; made from lightweight, non-conductive aluminum, they make retrofits simpler and faster as well as making the instrument more secure in the panel. This round avionics clamp (Alternate Part# 64544) measures 1.5 inches in diameter, with a 1-inch mounting depth and constructed of light weight aluminum with a chem-film anodized finish.Simplifies avionic equipment retrofits for replacement or repairDoes not require removal of the entire panelAnti-corrosion Chem-film, anodized aluminum finishProduct CodesMfr Part No:64544Shape: Round Size: 1.5 in Depth: 1 in Material: Aluminum Finish: Chem Filmed..

1.8m Predator Turbine Jet ARF, AMG Gray PRC PRED18-17..

1.8m Predator Turbine Jet ARF, Black/Blue PRC PRED18-12..