Out of Stock - On Backorder
PASSIVE ANTENNA SPLITTER/With SMA connector LDCBS1X2-SMA
PASSIVE ANTENNA SPLITTER/With SMA connector LDCBS1X2-SMAPassive GPS Antenna Splitter | 1 input, 4 output, SMA Connector
This loaded DC blocked passive splitter features one input and four outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.
This passive GPS splitter (Alternate Part# LDCBS1X4S) has one input and four output ports and has SMA connectors.
- Precise amplitude balance: <1 variation between ports
- Flat group delay: <1 ns variation between L1 & L2
- Low insertion loss: -7.5 dB loss typical across operating frequencies
- Wide accepted frequency range: cover entire L-band & major GNSS constellations
- Efficiently block ports: 200Ω resistors prevent antenna alarm faults
- Matched phase balance: 2° variation between ports
Product Codes | |
|---|---|
| Mfr Part No: | LDCBS1X2-SMA |
Weight: 11.7 oz (332 g)Dimensions: 1.3 x 3.25 x 2.5 in, max. (not including connectors)Operating Frequency: -57°C to 87°CFrequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩInput SWR: 2.0:1, max.Output SWR: 2.0:1, max.Insertion Loss: -6.5 dB to -8.5 dB (-7.5 dB, typical)Gain Flatness: 0.25 dB, typical (1.0 dB, max.)Amplitude Balance: 0.15 dB, typical (1.0 dB, max.)Phase Balance: 2.0°, max.Isolation: L1: 22 dB, min. (25 dB, typical) L2: 15 dB, min. (25 dB, typical)Group Delay Flatness: 0.1 ns, typical (1.0 ns, max.)Connector Option: SMA connector
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: LDCBS1X2-SMA
$0.00
