PITCH SERVO/Dual SG-1.20 RPM 065-00178-2400
PITCH SERVO/Dual SG-1.20 RPM 065-00178-2400KS 270C Pitch Servo | Dual, SG-1.20 RPM
The KS 270C Pitch Servo is used to provide AFCS control of the elevators. It contains a servo motor with amplifier and an engage clutch, as well as a torque sensor for trim command generation.
This unit (00178-2400) is rated at 1.2 rpm.
- Contains a servo motor with amplifier and an engage clutch, as well as a torque sensor for trim command generation
- Outputs a dual-channel trim sense signal with a scale factor of 100mV/in-lb, with a positive differential voltage representing CW torque
- Maximum sensed torque is at least 20 in-lb in each direction
- Also contains a tach feedback signal to provide servo motion sensing
- Outputs a differential signal with a scale factor of approximately 5.3V for full servo speed
- Is installed with a KM 275 servo mount, which contains a slip clutch for pilot override
Product Codes | |
|---|---|
| Mfr Part No: | 065-00178-2400 |
| SCHEDULE B CODE: | 8803.30.0010 |
| TSO: | C9c |
Weight: 2.5 lbDimensions: 3.925 x 4.675 x 4.605 inMounting: Two (2) AN 3 boltsPower Inputs: +28VDC at 4.0 ampsClutch Engage Signal: +28VDC (active high input) and Ground (active low input)Mating Connector: 030-03248-0000Signal Inputs: -10VDC to +10VDCSignal Outputs: Trim Voltage: -28VDC to +28VDC Trim Sense: -3VDC to +3VDC
- Stock: Warehouse
- Manufacturer Part #: 065-00178-2400
$11,279.99
