RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MCVariable gain portable networked re-radiating kit with LCD | TNC Connectors, 9VDC—32VDC Ouput VoltageThis variable gain portable networked re-radiating kit is designed to re-distribute GPS signals where an L1 antenna is already in use. Portable re-radiating kits consists of a re-radiating antenna, an amplifier with external power supply for powering the entire system. In the standard networked configuration, the re-radiating amplififer output J1 is DC blocked while the antenna port receives RF signal and passes DC voltage back to power an active antenna.  Custom gain, DC power, and connector configurations are available. This portable GPS re-radiating kit (Alternate Part# VGLCDPNRRK) features variable gain with LCD display, TNC connectors,  and 9 VDC — 32 VDC MIL-DTL-5015 10SL source power. Re-radiating amplifier with external power supply: 30 dB typical gainOption mounting kit hardwareOptional variable gain amplifier: adjustable from 1 dB — 25 dBOptional variable gain amplifier with LCD: adjustable from 1 dB — 30 dBProduct CodesMfr Part No:VGLCDPNRRKIT-TNC/0/MCRe-Radiating Antenna: Weight: 1.7 oz (48 g) Dimensions: 0.67 x 2.6 x 2.6 in Operating Temperature: -40°C to 85°C Frequency: 1.572 GHz — 1.578 GHz Axial Ratio: 3 dB, max. Peak Gain: 4 dBic Bandwidth: 20 MHz, min. Input SWR: 1.5:1, max. Characteristic Impedance: 50Ω   Re-Radiating Amplifier Weight: 9.9 oz (281 g) Dimensions: 1.25 x 3.25 x 2.5 in, max. (not including connectors) Operating Temperature: -57°C to 87°C Frequency Range: 1.1 GHz — 1.7 GHz Characteristic Impedance: 50Ω Req. DC Input V.: 3.3 VDC — 15 VDC Current Draw: 36 mA, typical (40 mA, max.) Gain: 29 dB — 31 dB (30 dB, typical) Input SWR: 2.0:1 Output SWR: 2.0:1, max. (1.8:1, typical) Noise Figure: L1: 2.0 dB L2: 4.25 dB Band Gain Flatness: 0.5 dB, typical (1 dB, max.) Group Delay: L1: 1.5 ns L2: 2.0 ns Reverse Isolation: L1: -55 dB L2: -60 dB Input P1dB: L1: -21.5 dBm L2: -23 dBm 3rd Order Intercept: -13 dBm Source Voltage Option: 9 VDC — 32 VDC, user supplied (MIL-DTL-5015 10SL Two-Pin DC Connector) Source Option: custom Connector Option: TNC type..

10 AMP DIGITAL LOW RESISTANCE OHMMETER DLRo10HDDLRO10HD 10 Amp Digital Low Resistance OhmmeterThe DLRO10HD digital low resistance ohmmeter is designed for measure low resistant values in applications ranging from railways and aircraft. This ohmmeter features an internal rechargeable battery to allow operation in a laboratory, workshop,  or in the field. It can also operation from a mains power supply, even if the battery has run out.Rugged case well suited to transportation with shoulder strap and lead set pouch„Removable lid facilitates easy test lead connection„Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements„7 Ah lead acid battery provides extended operation and can be charged whilst operating from mains power„Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes„Large, clear LCD display with backlight and contrast adjustment„Auto power off function conserves batteryProduct CodesMfr Part No:DLRo10HDWeight: 6.7 kg Case Dimensions: 315 x 285 x 181 mm Display: Main display 5 digit plus 2x5 digit secondary display Temperature: -10°C to 50°C, operational -25°C to 60°C, storage Battery Type: 6V, 7Ah sealed lead acid Voltage Input Range: 100V – 240V, 50/60Hz, 90VA Charge Time: 8 hours Backlight: LED backlight Auto Power Off: 300 seconds Mode Selection: Left rotary switch Range Switch: Right rotary switch IP Rating: IP65 with lid closed IP54 during battery operation Safety: IEC61010-1, CAT 300V when used with terminal cover EMC: IEC61326-1..

10' CABLE KIT/Strobe to power. Includes: connectors to hook strobe light to power supply only, Warning Placards and install service manual. 16 gauge cable, 3 conductor, shielded, cable diameter .275, weight .050 lbs per linear foot. Kit DOES NOT include switches or breakers. 01-0750218-00..

12 Volt 5-Amp Power Supply THP 1205P. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number THP 1205P against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

14.2VDC POWER SUPPLY 53050(12V). FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 53050(12V) against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

19 RACK MOUNT POWER SUPPLY (P/N: VR-35M). Engine or accessory mount. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number VR-35M against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

220V BASE STATION POWER SUPPLY ASTPS11IFE220V BASE STATION POWER SUPPLY Product CodesMfr Part No:ASTPS11IFEECCN:5A991SCHEDULE B CODE:8504409580..

2300QC SUPER PAC PORTABLE STARTING UNIT/LEAD ACID BATTERY/CORDED 50 AMP POWER SUPPLY IN ONE UNIT/2400 PEAK AMPS/7 AMP OUTPUT W/ 4HR RECHARGE TIME 2300QC SUPER PAC2300QC-S Start Pac Super Pac Portable Starting Unit | Lead-Acid, 28.5 VDC, 50A, 2300A StartingThe compact and powerful Start Pac® 2300QC Super Pac uses proprietary quick charge technology combined with a lightweight 50 amp (28.5 VDC) power supply. This portable all-in-one micro GPU allows for excellent 24 volt engine starts as well as 18.5 VDC continuous power for powering up aircraft systems. This unit is a full 24 VDC battery pack and will provide superior starts on all electrically-started turbine engines. It has dual, redundant chargers with a total of 7 amps 5 output and a recharge time of approximately 4 hours. The Super Pac comes standard with trolly and is an idea alternative to larger traditional GPUs. This Super Pac is not for battery charging.Battery Module 2300 peak amps for engine startingPatented 10 second battery change designQC Trolley includedBuilt-in smart chargers Power Supply Module 28.5 Volts continuous for avionicsAC Input: 110 Volts or 220 VoltsDC Output: 0—50 Amps + 5%Continuous duty fan cooledOver-temperature protectionOver-current protectionOver-voltage protection Product CodesMfr Part No:2300QC SUPER PACECCN:5A991SCHEDULE B CODE:8504.40.9580Voltage: 28.5 VDC Amperage: 50A power supply / 2300A engine starting Power Source: 110/220VAC Weight: 79 lb (35.6 kg), complete Dimensions: 19.2 x 7.5 x 14 in (49 x 19 x 36 cm)..

24VDC/STARTS UP TO 500HP/QC 1324-1 qc1324-1QC DC Portable Aircraft Starting Unit | 24VDC, 1,300A Peak OutputStart Pac DC portable aircraft starting unit provides superior starts for electically-started turbine or piston engines up to 500 horse power. aircraft and helicopters. The1324-1QC features seperate removable batteries that can be swapped in just 15 seconds. This allows makes using this GPU in the field or remote locations easier. Also, this GPU unit is capable of two or three start between charges. In addition, certain aircraft allows onboard recharging of this GPU unit without an AC power source — making this portable engine starting unit virtually maintenance-free.Compact, lightweight portable aircraft power supplyPortable enough to use as a carry-on Start-Pac whenever power is neededNo duty cycle for clean continuous powerAll-in-one power supply with included universal smart float-type charger, power plug, and 7-foot aircraft cablesIntegrated LED charge indicatorCold resistant, valve regulated high amperage output lead acid batteriesEliminates sulfating problems provides lower maintenanceSealed, non-hazardous battery pack for use in any positionRecyclable, nontoxic and will not leakLow VOC, powder-coated, aluminum case protects the unit from weatherPatented quick change design offers quick and simple battery replacementsProduct CodesMfr Part No:1324-1 qcWeight: 35 lb (15.9 kg) Dimensions: 15.5 x 4 x 11.75 in (39.4 x 10.2 x 29.8 cm) Battery Type: lead acid Voltage Output: 24 VDC Peak Current: 1,300 A Capacity: 13 Ah @ 10A rate Charger Type: built-in float-type 90 VAC – 240 VAC, 50/60 Hz Charging Time: 30 min. to 3 hr..

28.5VDC/105AMP POWER SUPPLY 53105M. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 53105M against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

28.5VDC/105AMP POWER SUPPLY-REGULAR SIZE 5310553105 Start Pac Aircraft Power Supply | 28.5VDC Output, 220V InputThe Start Pac model 53105 is designed to power up 24-volt aircraft systems and provides a continuous current up to 105-amps. The 28.5 volt output is designed to simulate the aircraft's power when operating on its own.Start Pac aircraft power supplies have been specifically designed for avionics maintenance to power up various functions such as inverters, avionics, and GPS programming/ equipment. Technicians can preform aircraft maintenance without using the aircraft's onboard battery thus preventing unnecessary wear and conserving aircraft power for startup purposes. The low VOC powder coating protects the Start Pac from wear and weather conditions. This Start Pac aircraft power supply (Alternate Part# 53105R) operations on 220-volt AC power and includes a 50ft, extension cable with a blank end. Compact, lightweight portable aircraft power supplyNo duty cycle – provides clean continuous powerMaximum current output: 28.5-volts @ 105-ampsResistant aluminum case with low VOC, durable powder-coat finishDesigned for heavy-duty usageOverload protectionProduct CodesMfr Part No:53105ECCN:5A991SCHEDULE B CODE:8504.40.9580Weight: 12 lb (5.4 kg) Dimensions: 16 x 4-3/8 x 5-1/4 in (40 x 11.5 x 13.3 cm) Continuous Current Output: 105A, max. DC Voltage Output: 28.5 VDC AC Voltage Input: 180 VAC — 240 VAC AC Current Input: 14A @ 220 VAC, at maximum DC power output Phase: Single Forced Air Cooling: yes Circuit Protection: over-current, over-voltage, over-temperature..

28.5VDC/25AMP POWER SUPPLY 53025/24V53025/24 Start Pac Light Aircraft Power Supply | 28.5VDC Output, 25A Current, 220V InputThe Start Pac model 53025/24 is designed to power up 24-volt aircraft systems and provides a continuous current up to 25-amps. The 28.5 volt output is designed to simulate the aircraft's power when operating on its own.Start Pac mini aircraft power supplies have been specifically designed for light avionics maintenance to power up various functions such as inverters, avionics, and GPS programming/ equipment. Technicians can preform aircraft maintenance without using the aircraft's onboard battery thus preventing unnecessary wear and conserving aircraft power for startup purposes. The low VOC powder coating protects the Start Pac from wear and weather conditions.This Start Pac aircraft power supply (Alternate Part# 53025/24) operations on 220-volt AC power and has a 50A/12-volt current output.Compact, lightweight portable aircraft power supplyNo duty cycle – provides clean continuous powerMaximum current output: 28.5-volts @ 25-ampsResistant aluminum case with low VOC, durable powder-coat finishDesigned for heavy-duty usageOverload protectionProduct CodesMfr Part No:53025/24VECCN:5A991SCHEDULE B CODE:8504.40.9580Weight: 7 lb (3 kg) Dimensions: 11-3/4 x 5 x 4 in (30 x 13 x 10 cm) Continuous Current Output: 25A, max. DC Voltage Output: 28.5 VDC AC Voltage Input: 90 VAC — 240 VAC AC Current Input (max. DC output power): 7A @ 110 VAC 3.5 @ 220 VAC Phase: single Forced Air-Cooling: yes Circuit Protection: over-current, over-voltage, over-temperature..

28.5VDC/50AMP POWER SUPPLY 53050. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 53050 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

30' CABLE KIT/STROBE to POWER/Includes connectors to hook up strobe light to power supply, warning placards and install service manual. Cable is 16 gauge, 3 conducter, shielded, .275 weight, .050 lbs per linear foot. DOES NOT include switches or breakers. 01-0750214-0030' CABLE KIT/STROBE to POWER/Includes connectors to hook up strobe light to power supply, warning placards and install service manual. Cable is 16 gauge, 3 conducter, shielded, .275 weight, .050 lbs per linear foot. DOES NOT include switches or brea30' CABLE KIT/STROBE to POWER/Includes connectors to hook up strobe light to power supply, warning placards and install service manual. Cable is 16 gauge, 3 conducter, shielded, .275 weight, .050 lbs per linear foot. DOES NOT include switches or breakers.Product CodesMfr Part No:01-0750214-00ECCN:EAR99PMA:PQ0610NESCHEDULE B CODE:8539.10.0030STC:SA615EA..

30' EXTENSION CORD/Black for use with model 53300 power supply 30F CORD..

4 LED ADJUSTABLE MAPLIGHT/Blue, 12V, Cessna Certified PMA, Panel Mount MAP4-B12Map Light 4 FAA-PMA Cessna Certified LED Maplight | Blue, 12V, Panel MountThe MAP 4 series panel mountable LED maplight is FAA-PMA certified for use in Cessna aircraft and features four, dimmable LEDs for providing just the right amount of light for operational tasks. This task light is is available in  four colors: green, red, blue, and white. It is easy to install and is fully-adjustable in two directions. Also, the MAP 4 maplight is compatible with all dimming systems, manufactured and tested in accordance with FAA-PMA approved protocols for quality. This MAP4 series (Alternate Part# MAP4-B12) is Cessna certified, features blue lighting, and operates on a 12-volt power supply. 20,000 hour LED lamp lifeFully-adjustable in two directionsSurface mountableMIL-SPEC Anodized constructionPrecision CNC machinedCompatible with all dimming systemsAvailable in four colors: green, red, blue, or whiteProduct CodesMfr Part No:MAP4-B12ECCN:9A991.BSCHEDULE B CODE:9405.40.0000Installed Height: 2.125 in (at 90° position) Color: blue Input Voltage: 12 volt Mounting Hole: 15/32 in thru hole Approvals: FAA-PMA for Cessna aircraft..

4 LED ADJUSTABLE MAPLIGHT/Green, 12V, Cessna Certified PMA, Panel Mount MAP4-G12Map Light 4 FAA-PMA Cessna Certified LED Maplight | Green, 12V, Panel MountThe MAP 4 series panel mountable LED maplight is FAA-PMA certified for use in Cessna aircraft and features four, dimmable LEDs for providing just the right amount of light for operational tasks. This task light is is available in  four colors: green, red, blue, and white. It is easy to install and is fully-adjustable in two directions. Also, the MAP 4 maplight is compatible with all dimming systems, manufactured and tested in accordance with FAA-PMA approved protocols for quality.   This MAP4 series (Alternate Part# MAP4-G12) is Cessna certified, features green lighting, operates on a 12-volt power supply, and has a lamp head diameter of 0.80 inch.20,000 hour LED lamp lifeFully-adjustable in two directionsSurface mountableMIL-SPEC Anodized constructionPrecision CNC machinedCompatible with all dimming systemsAvailable in four colors: green, red, blue, or whiteProduct CodesMfr Part No:MAP4-G12Installed Height: 2.125 in (at 90° position) Lamp Diameter: 0.80 in Thread: 15/32-32 x 0.45 in Color: green Input Voltage: 12 volt Mounting Hole: 15/32 in thru hole Approvals: FAA-PMA for Cessna aircraft..

4 LED ADJUSTABLE MAPLIGHT/Green, 12V, Panel Mount OP4-G12Oplite 4 Experimental Aircraft LED Maplight | Green, 12V, Panel MountThe Oplite 4 series panel mountable LED maplight features four LEDs for providing the right amount of light for operational tasks. This task light is is available in  four colors: green, red, blue, and white. It is easy to install and fully-adjustable in two directions. Also, the Oplite 4 maplight is compatible with all dimming systems, manufactured and tested in accordance with FAA-PMA approved protocols for quality. This Oplite 4 series (Alternate Part# OP4-G12) features green lighting, operates on a 12-volt power supply, and has a lamp head diameter of 0.80 inch. 20,000 hour LED lamp lifeFully adjustable in two directionsSurface mountableMIL-SPEC Anodized constructionPrecision CNC machinedCompatible with all dimming systemsAvailable in four colors: green, red, blue, or whiteProduct CodesMfr Part No:OP4-G12Installed Height: 2.125 in (at 90° position) Lamp Diameter: 0.80 in Thread: 15/32-32 x 0.45 in Color: green Input Voltage: 12 volt Mounting Hole: 15/32 in thru hole..

4 LED ADJUSTABLE MAPLIGHT/Green, 24V, Panel Mount OP4-G24Oplite 4 Experimental Aircraft LED Maplight | Green, 24V, Panel MountThe Oplite 4 series panel mountable LED maplight features four LEDs for providing the right amount of light for operational tasks. This task light is is available in  four colors: green, red, blue, and white. It is easy to install and fully-adjustable in two directions. Also, the Oplite 4 maplight is compatible with all dimming systems, manufactured and tested in accordance with FAA-PMA approved protocols for quality. This Oplite 4 series (Alternate Part# OP4-G24) features green lighting, operates on a 24-volt power supply, and has a lamp head diameter of 0.80 inch.20,000 hour LED lamp lifeFully adjustable in two directionsSurface mountableMIL-SPEC Anodized constructionPrecision CNC machinedCompatible with all dimming systemsAvailable in four colors: green, red, blue, or whiteProduct CodesMfr Part No:OP4-G24Installed Height: 2.125 in (at 90° position) Lamp Diameter: 0.80 in Thread: 15/32-32 x 0.45 in Color: green Input Voltage: 24 volt Mounting Hole: 15/32 in thru hole..

4 LED ADJUSTABLE MAPLIGHT/Red, 12V, Cessna Certified PMA, Panel Mount MAP4-R12Map Light 4 FAA-PMA Cessna Certified LED Maplight | Red, 12V, Panel MountThe MAP 4 series panel mountable LED maplight is FAA-PMA certified for use in Cessna aircraft and features four, dimmable LEDs for providing just the right amount of light for operational tasks. This task light is is available in  four colors: green, red, blue, and white. It is easy to install and is fully-adjustable in two directions. Also, the MAP 4 maplight is compatible with all dimming systems, manufactured and tested in accordance with FAA-PMA approved protocols for quality.  This MAP4 series (Alternate Part# MAP4-R12) is Cessna certified, features red lighting, operates on a 12-volt power supply, and has a lamp head diameter of 0.80 inch.20,000 hour LED lamp lifeFully-adjustable in two directionsSurface mountableMIL-SPEC Anodized constructionPrecision CNC machinedCompatible with all dimming systemsAvailable in four colors: green, red, blue, or whiteProduct CodesMfr Part No:MAP4-R12Installed Height: 2.125 in (at 90° position) Lamp Diameter: 0.80 in Thread: 15/32-32 x 0.45 in Color: red Input Voltage: 12 volt Mounting Hole: 15/32 in thru hole Approvals: FAA-PMA for Cessna aircraft..