Menu
Your Cart

Rack Mount Amplified Splitter/2 antenna input, 16 output DRMALDCBS2X16

Rack Mount Amplified Splitter/2 antenna input, 16 output DRMALDCBS2X16
Out of Stock
Rack Mount Amplified Splitter/2 antenna input, 16 output DRMALDCBS2X16
RACK MOUNT AMPLIFIED SPLITTER/2 antenna input, 16 output DRMALDCBS2X16
Dual Antenna Rack Mount Amplified GPS Splitter | 2 input & 16 Outputs, 48VDC power, high isolation

This rack mount amplified splitter features dual antenna inputs and 16 output ports that cover the L1 and L2 GPS frequency bands with excellent gain flatness. In the normal configuration, the splitter is powered by a receiver connector to J1 powering the splitter's amplifier and roof antenna. The output ports have a 200Ω load which simulates antenna draw to prevent antenna alarm faults. This dual antenna, 16-output unit is ideal where a GPS carrier signal is required by up to 16 GPS devices at once.
 

This dual antenna, rack mount splitter (Alternate Part# DRMALDCBS2) features two inputs and 16 outputs, 48 VDC power option, and high isolation option.


  • Dual antenna input
  • Excellent gain flatness: <1.5 dB between L1 & L2
  • 14 dB amplified gain
  • 200Ω resistors on DC blocked output ports
  • LED power light
  • -48 VDC power option available
  • Durable and rugged 3U chassis
  • Extremely flat group delay
  • High isolation option available
  • Phase matched outputs: <1° between J1 & J2

AI disclosure: this description was generated with AI assistance from this product's own listing data.


Product Codes

Mfr Part No:DRMALDCBS2X16


Weight: 12.2 lbDimensions: 5.4 x 18 x 17 inOperating Temperature: -40°C to 75°CFrequency Range: 1.1 GHz — 1.7 GHzIn/Out Impedance: 50ΩGain: 13 dB — 15 dB (14 dB, typical)Gain High Isolation: -2.0 dB — 2.0 dB (0.0 dB, typical)Input SWR: 2.0:1, max.Output SWR: 1.5:1, max.Noise Figure: 3.8 dB, typical (4.3 dB, max)Gain Flatness: 0.5 dB, typical (1.0 dB, max.)Amplitude Balance: 1.5 dB, max.Phase Balance: 1.0°Group Delay Flatness: 5 ns, max.Current Draw: 15 mA, max.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: Out of Stock
  • Manufacturer Part #: DRMALDCBS2X16
$3,007.00

Aircraft Fitment Finder

Returns & refund summary

  • 30-day return window — with prior return authorization, unopened in original packaging.
  • Restocking fee: 20% on unopened items, 30% on open-box items.
  • Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
  • Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
  • Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.

Full terms: Return Policy.

Authenticity & authorization

We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.

See our full Manufacturer Authorizations page for the current per-brand status.

Need traceability paperwork?

If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.

Shipping

Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.